SEM 110 Detector frequencies
zoom_out_map
chevron_left chevron_right

SEM 110 Detector frequencies

SEM-110. Located easy way to devices that work by Bluetooth, GSM, DECT, UHF, etc as the cameras are wireless, microphones, pagers, microphones contact with transmission, etc

 

 

€1,598.50

Official Distributor - Factory Direct

Immediate delivery
SEM 110 Detector frequencies
SEM 110 Detector frequencies
€1,598.50

secure payment ESPIAMOS.com

The Detector Model 110 is designed for detection and localization of the devices of radiation of radio waves (DR) designed or used for the unauthorized transfer of data through the radio channel.

  • Radio-microphones (BUG,s);
  • retransmitter of radio telephone (TAP);
  • stethoscope wireless;
  • Video-cameras with radio channel for data transmission;
  • Radio locators for people, vehicles or loads, and tracking systems;
  • Mobile phones and modems for radio, GSM, or standard DECT,
  • devices data transmission via Bluetooth and WLAN.

The principle of operation of the detector model 110 is based on the detection of the broadband electric field.

The detector operates in two main modes: SEARCH and MONITORING.

It also includes the modes: LOG VIEW (JOURNAL), OSCILLOSCOPE and RECORDER.

 

SEARCH MODE

This mode is intended for search and location of the output location radio (RD). The use of this mode is based on a visual estimate of the level of the signal in the bar with a scale of 32 segments. Additionally, it indicates separately the continuous signals and pulses, identifying signals of GSM, DECT, Bluetooth, WLAN and the frequencies of the signal stable.

It provides the possibility of acoustic control using headphones.

 

 

  1. Indicator bar 32 segments of the average power of the source of radio frequency radiation (indicated in the radio transmitters of continuous output).
  2. Indicator bar 32-segment level member of the impulse radio signal (signals in transmitters of impulse radio, such as GSM, DECT, etc).
  3. Indication of the sensitivity of the scales ("L" - low, "M" - medium, "H" - high).
  4. Frequency bands ("B1", "B2") low pass filter "LPF" ("F") / indication decorto period to set the level scale to zero ("ZERO");
  5. Current value of the level member of impulse / constant, in comparison with zero level, dB;
  6. Value of the frequency of the periodic signal, MHz
  7. Patterns of transfer of identified data (GSM, DECT, DECT BASE, Bluetooth or WLAN
  8. Change in time of the level of the signal component of constant dominant
  9. Change in time of signal level with dominant impulse
  10. Level current zero value of the component of momentum / constant, dB.

 

MONITOR MODE

This mode is intended for stand-alone operation of the MODEL 110 at pre-established conditions. The information about the detected signals stored in the nonvolatile memory of the device (9 spaces, each of 999 events).

Can also be programmed operations work.

 

 

 

  1. The indicators of the level of the RF signal of the transmitter
  2. Graphical labels of the levels of alarm threshold
  3. Sign of no permission for recording in EVENT LOG
  4. Countdown of 5 seconds
  5. Current value of impulse / constant component of the signal, comparing with absolute level, dB
  6. Value of the alarm thresholds for pulse signal / constant, dB

 

MODE, LOG VIEW (JOURNAL)

This mode is designed for viewing the log of events that occurred while the unit worked in MONITOR mode. The events are sorted by time, duration or signal level.

 

 

 

  1. Number of view of the bank / Number of banks assets
  2. Number of view events / number of events in the bank
  3. Frequency range, in which the alarm happened (B1: 50-2500 MHz, B2: 2500-7000 MHz).
  4. properties of the signal at the time of the excess of the alarm threshold.

 

OSCILLOSCOPE MODE

 

 

 

  1. Type of configuration (A - M auto - manual), and the relative value of the trace vertical (1 to 7).
  2. Oscillogram
  3. Value of the trace horizontal in the conversion to the values of full screen (1, 2, 4, 8, 16 and 32 ms).

 

ANALYSIS SOFTWARE SPECIAL "110ANALYZER"

The software is intended for:

  • Graphical display of data and results of work of the DETECTOR MODEL 110;
  • The full remote control of the DETECTOR MODEL 110 connected to a PC
  • Greater allocation of adjustments to the monitoring mode;
  • Load and display the textual information and the graphics of the work of the DETECTOR MODEL 110 in monitoring mode (event Log);
  • Firmware update via the Internet.

 

 

 

 

THE PACKAGE CONTAINS

 

  • Main unit
  • Antenna HF
  • Antenna SHF “110.SHF” (supplied optionally)
  • USB Cable

 

1472
Data sheet
Brand
TS Market
Rec
IF
Voice activation
IF
Dimensions
90x54x21 mm
Sensitivity
meter -35 (50 MHz) -50 (500 MHz) -20 (2500 the MHz)
Consumption
65 mA
Dynamic range
of indication, dB 55 (50-2000 of MHz), 40 (2000-2500 the MHz)
Frequencies
cutting of LPF, Mhz: 750
Frequency range
50-2500
Sensitivity Unbral, dBm
-75 (50 MHz) -70 (1500 MHz) -50 (2500 the MHz)
Measures of frequencies
0.005
You might also like
Reviews
Write your review

SEM 110 Detector frequencies

SEM-110. Located easy way to devices that work by Bluetooth, GSM, DECT, UHF, etc as the cameras are wireless, microphones, pagers, microphones contact with transmission, etc

 

 

Write your review