PR4 for heavy vehicles from 10V to 32V
zoom_out_map
chevron_left chevron_right

PR4 for heavy vehicles from 10V to 32V

The GPS PR4 is the 4th generation of this advanced model designed for different types of heavy commercial vehicles such as trucks, buses, agricultural machinery or construction or any type of special machinery.

€164.56

Free shipping

Immediate delivery
PR4 for heavy vehicles from 10V to 32V
PR4 for heavy vehicles from 10V to 32V
€164.56

secure payment ESPIAMOS.com

The GPS PR4 is the 4th generation of this advanced model designed for different types of heavy commercial vehicles such as trucks, buses, agricultural machinery or construction or any type of special machinery. The margin of the data provided by the GPS-this device also obtains data on-board of the vehicles (CAN bus) FMS and standards J1708.

Main functions:

  • Monitoring and control of fleets
  • Optimization and control of route
  • The control and fuel management
  • Implementation of the style of eco-driving
  • Temperature Control

Thanks to the RS232 ports and RS485 the PR4 can connect with up to 12 sensors of level of fuel to ensure better monitoring and control of fuel. In addition, these devices are equipped with interface 1-Wire which allows you to install additional accessories associated with the safety of vehicles and improves the control. This allows the PR4 more reliability by reducing the daily costs related to the vehicle, saving employee time and improving the overall performance of the company.

 

POSSIBILITIES OF THE PR4:

  • Monitoring of driver behaviour (Eco-Drive)
  • reading data from the on-board computer (CANbus: J1708, FMS)
  • Control of the temperature in refrigerators
  • The registration and driver identification using i-Button
  • Ignition lock remote
  • Monitoring of Fuel
  • Geozones Internal
  • Fight against the Inhibitors
  • Various functions via SMS
  • Send messages and routing to driver via Garmin
  • Know when the ignition is turned on or off
  • To know if the battery voltage fallla
  • Monitor temperature level in refrigerator
  • Opening and closing of doors

 

List of peripheral devices available that can be used with PR4:

Available in 1-Wire:

  • 4 × temperature Sensors DS18B20/DS18S20 (10 mA @ 5 V)
  • 1 x iButton DS1990 (20 mA @ 5 V)

Available Digital Outputs:

  • 1 × Buzzer/LED
  • 1 × ECO Driving panel (Power supply from 1-Wire. 40 mA @ 5 V)
  • 1 × ignition Lock

Available in analog Inputs:

  • 2 × Sensors fuel analog

Available on RS232 port A and/or B:

  • 2 x LLS Sensors fuel digital
  • 1 x Garmin (Send and receive SMS, routes to/from the navigation system. Single-port (B)
  • 2 x RFID readers
  • 1 x CANlog adapter (catch CAN data from the adapter CANlog connected to the vehicle)

Available in RS485 port C:

  • Up to 10 LLS sensors fuel

Available on CAN interface:

  • Reading the information in CANbus (FMS)

 

1741
Data sheet
Memory
4 MB (up to 32 GB)
Dimensions
111 x 75 x 25 mm
Working temperature
-35 to +55 °C
Battery
Li-Po 1050 mAh and 3.7 V
GPS / GLONASS
module Ublox MAX-7C outside
Accelerometer
3 axes
Digital inputs
4 entries
Analog inputs
2 entries
Digital outputs
2 outputs
CAN bus
FMS, J1708
Bus
RS232 / RS485: 2 x RS2321 x RS485
1-Wire
1 –Wire peripherals
Configuration Firmware
OTA (Over the air) GPRS or USB
GSM antenna
Internal antenna
Power supply
10 – 32 V DC
You might also like
Reviews
Write your review

PR4 for heavy vehicles from 10V to 32V

The GPS PR4 is the 4th generation of this advanced model designed for different types of heavy commercial vehicles such as trucks, buses, agricultural machinery or construction or any type of special machinery.

Write your review